Dry Riser Wet & Visual Tests Essex
Welcome to Morgan Fire Protection. We offer our clients a range of fire protection and prevention services including the complete maintenance dry and wet riser maintenance to the BS9990:2015 standard. This comprises a 12 monthly wet pressure test to 150 PSI and simulates the usage by the Fire Service which legislates that equipment works ‘first time’ in fire situations.
Our services include the testing of dry risers. In buildings over 18 and under 60 metres high, dry risers are a vital element in fire protection, delivering vast volumes of water directly to each floor enabling instant access for the Fire Service.
This service is followed by a six-monthly inspection of the riser system and on completion, a certificate is issued. Morgan Fire Protection will identify any damaged parts or missing signage preventing the full, safe operation of the riser.
The Legal Requirement
The person responsible for a building or site is legally required to maintain all fire fighting equipment, including dry risers. The British Standard Code of Practice BS9990:2015 requires a full annual pressure test and six monthly visual checks for dry risers for buildings above 18 metres and below 60 metres (buildings over 60 metres/18 storeys require wet risers).
Clause 7 of the Code states that inlets, landing valves, drain valves and landing valve boxes should be inspected every 6 months and recommends that wet tests be carried out annually when the main can be checked for leaks.
BS9990:2015 also states that maintenance and repairs should be carried out by a competent person. With Morgan Fire Protection you can be confident that all work will be carried out in accordance with the Code of Practice. We are registered with BAFE, members of the British Fire Consortium and SAFEcontractor approved.
We welcome your call on 0800 0856 381 or by email to dryriser@morganfire.co.uk for the products and services shown on this page. Alternatively please complete the Quick Enquiry form and we will contact you promptly.
Maintenance & servicing
Dry Risers are a vital piece of fire protection equipment for buildings above 18 metres. They play a critical role in delivering considerable quantities of water in a high rise building. They can, however, be prone to serious neglect and vandalism so it is important to have them regularly maintained and serviced. Morgan Fire Protection engineers will carry out a full annual pressure test and six monthly visual checks to the current British Standard Code of Practice BS9990:2015 using Morgan Fire’s dry riser testing appliances.
Annual wet test
Dry and wet risers are checked and pressure tested to 150 PSL or 10 bar for a minimum of 15 minutes. All insets and outlets are checked for leaks and any missing or faulty items replaced. Flow testing is also carried out. If any valves have to be replaced a further pressure test will be carried out before certification is issued.
Six monthly visual test
This test involves a visual inspection only as required by BS9990:2015 and any missing or damaged items are replaced.
Private hydrant test
For large premises with hydrants on sites, Morgan Fire Protection will test flow meter rates and carry out a visual inspection of the location, H plate, cover and frost valve. BS9990:2015 clause 7 requires checking of pits, frames, covers and surface paving round edges of frames.
Further Information
If you would like any further information regarding the services available from Morgan Fire Protection, please give us a call on Tel. No, 0800 0856381, via our contact page, or via our Facebook page and we will be happy to answer any of your questions.
